R100GS TO WITH 320 ROTOR

This kit is designed to fit K style Brembo 4 pot caliper or the OEM caliper (as shown in the first Picture) to popular 90's R100GS models.
  The pads are much wider on the original 2 pot unit, they hang off on the inside by a few mm's. This is not an issue if you use a new rotor like the one supplied with this set. The pads will wear normally as they make contact at all of the unions. 
There are several advantages with my set:
My kit is lighter than others because it uses an aluminum carrier and a narrow light weight rotor.
Other sets use custom made rotors, mine uses readily available Honda rotors.
My adapters are lighter.
My rotors are floating rotors, which perform better and shed heat faster.
My hub adapter uses the stock bolts, but without need for the heavy steel nuts.
Installation to the wheel is easier with just one wrench.
My set works with 2 types of calipers as described above.